What is the IPTV service:

Digital TV service: this service allows you to follow and watch TV channels, movies and programs on the TV screen via ADSL technology through the router that allows streaming the service.

Via a Wi-Fi network or via a connection via a network cable to one of the devices on which the service can be broadcast.

The service is based on multi-cast technology within the exchange.

Requirements for the operation of the service:

• -One of the devices that the IPTV service can work on after connecting to the router is
• - TV screen: in case it supports Android and Google Play store
• - Mobile devices on Android and IOS systems
• - Or computers run by Windows
• -If the TV screen does not support the Android system, the TV box can be connected to the TV And install the service application.
• To install the service application, you must download the Waves TV application on one of the previously mentioned devices to download click here...
• To add new settings on ADSL router that supports the service by router type, click here... to find out the settings.

How to subscribe to the service:

• -The IPTV service is processed for the subscriber by submitting an application from WAVES ISP
• - The registration fee for the service is, 2200 SYP must be paid beside the internet bill. You will get first month of service FOR FREE.
• - the service end within 48 hours and will be programmed and synced with the internet line.
• - we connect with the subscriber to activate the service.

Possible problems:

The telephone line plays the main role in the quality of service, as in the event of interference on the landline, the service may not work optimally for it. You must check the status of the phone line before subscribing to the service by accessing the router settings webpage.

Which should be in the normal SNR state to see the online noise ratio through the status value and go to the option

The case of loss of the CRC signal from 15 to 20 shows us that the noise ratio on the line is low and there is a peak

Which should have a value of (0) and if it rises significantly, there is a loss of signal and data on the line, which causes a problem on the image quality.